|
Saber Outboard Synthetic 100:1 Pre-Mix
2-Cycle Oil
New AMSOIL Saber Outboard Synthetic 2-Cycle
Oil is specifically designed for lean mix ratios in pre-mix
applications. Saber Outboard contains lower temperature
dispersants for water-cooled outboard motors. Extensive
testing shows superior lubricity and cleanliness properties
at lean mix ratios with this premium synthetic formulation.
Product Performance
- Saber Outboard is a very low smoke, low odor product
- At 100:1, produces 30 percent lower emissions than
oils mixed at 50:1
- One mix ratio for everything eliminates confusion
- Versatile and very good for many applications
- Cost effective compared to oils mixed at 50:1 or richer
- Saber Outboard exhibits low aquatic toxicity
- Lean mix ratio prevents plug fouling and exhaust port
deposits
PRODUCT DESCRIPTION
AMSOIL Saber Outboard Synthetic 100:1
Pre-Mix 2-Cycle Oil is formulated with exclusive AMSOIL
synthetic base oils and premium additives. Designed for
lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has
excellent lubricity and cleanliness properties, controlling
friction and preventing wear, plug fouling, ring sticking
and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle
Oils have been protecting and providing improved performance
in two-cycle motors since 1973.
Saber Outboard
Saber Outboard (ATO) is specifically designed
for outboard motors. It is also very good for personal watercraft,
jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard
contains a heavy dose of lower temperature dispersant additives
that excel at preventing varnish and deposits from forming
in water-cooled motors. Saber Outboard is a very low smoke,
low odor, low toxicity product that produces as much as
30 percent fewer emissions at 100:1 mix ratios than oils
mixed at 50:1. It is ideal for trolling motors as it prevents
“oil loading” and plug fouling for rapid throttle response.
Operators and the environment benefit from the use of Saber
Outboard. It is recommended for pre-mix use where TC-W3
or API TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended
for 100:1 mix ratios in normal service and 50:1 to 80:1
mix ratios in severe service applications such as commercial
equipment operations and racing.
|
TYPICAL TECHNICAL PROPERTIES
|
|
Saber Outboard Synthetic 100:1
Pre-Mix 2-Cycle Oil
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM
D-445)
|
13.4
|
|
Kinematic Viscosity @ 40°C, cSt (ASTM
D-445)
|
91.3
|
| Viscosity Index (ASTM D-2270) |
148
|
|
Pour Point °C (°F) (ASTM D 97)
|
-36 (-33)
|
|
Flash Point °C (°F) (ASTM D 92)
|
102 (216)
|
| Fire Point °C (°F) (ASTM D 92) |
106 (223)
|
| DANGER:
harmful or fatal if swallowed. Contains synthetic
lubricant and petroleum distillates. If swallowed
do not induce vomiting. Contact a physician immediately.
Keep away from fire, heat and open flame. Use with
adequate ventilation. Avoid frequent or prolonged
skin contact. Flush eyes with water for 15 minutes
in case of contact. KEEP OUT
OF REACH OF CHILDREN. |
|
