|
Series 2000 Synthetic Racing Grease
Ultimate protection for hard-driven, high-performance
vehicles. Dramatically reduces friction and wear for improved
performance. Excels at both high and low temperature performance.
Outperforms other conventional and synthetic greases.
Applications
AMSOIL Series 2000 Synthetic Lithium Complex
Racing Grease meets the highest performance standards of
the National Lubricating Grease Institute, GC for wheel
bearing applications and LB for chassis applications.
Load Capacity
AMSOIL Series 2000 Racing Grease is an
extreme-pressure multi-purpose grease formulated for high-temperature/high-speed
applications. Yet, it excels in the protection of low-speed
bearings, a job usually reserved for heavy-duty products.
Components get the load bearing capacity of a heavy-duty
grease without sacrificing the high-temperature protection
of a multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease passes
the Ford Film Strength Endurance Test with a 16 point margin
(see graph). Most nonsolid-fortified racing greases, synthetic
or conventional, do not pass. AMSOIL Series 2000 Racing
Grease keeps greased components in like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs
a high Viscosity Index synthetic base oil with a top-quality
lithium complex thickener, known for its extraordinary performance
in temperature extremes. AMSOIL Series 2000 Racing Grease
offers excellent low-temperature pumpability and high-temperature
consistency for dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease’s excellent
oxidation resistance and robust package of oxidation inhibitors
prevent grease breakdown and component surface damage in
the highly oxidizing conditions associated with high temperature
operations.
Friction Reduction
AMSOIL Series 2000 Racing Grease maximizes
power through-put and fuel efficiency by minimizing friction.
The extra power given by Series 2000 improves acceleration
and top-end speed.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists
water wash out and inhibits rust and other forms of corrosion.
| Typical Technical
Properties |
| AMSOIL
Synthetic Lithium Complex Racing Grease |
NLGI
GC-LB |
Series
2000 Racing Grease |
| Thickener |
NR* |
Lithium
Complex |
| NLGI
Consistency Grade |
NR* |
2
EP |
| NLGI
Performance Grade |
NR* |
GC-LB |
| Penetration
(ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes |
220
- 340 |
265
- 295 |
| Dropping
Point (ASTM D-566) °C [77° F] |
220
[428] |
285
[545] |
| Water
Washout (ASTM D-1264) 79° C [175° F] % loss |
15
max |
5.1 |
| Oil
Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss
|
10
max |
2.8 |
| Rust
Protection (ASTM D-1743) |
pass |
pass |
| Timken
OK Load Test (ASTM D-2509), lbs. |
NR* |
60 |
| Fortified
with Moly Compound |
NR* |
no |
| Four
Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm |
0.9
max |
0.32 |
| Compatibility
with other greases |
NR* |
excellent |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Weld Point,
kgf |
200
min |
400 |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Load Wear Index,
kgf |
30
min |
65 |
| High
Temperature Life (ASTM D-3527) hours |
80
min |
300 |
| Fretting
Wear (ASTM D-4170)* mg |
10
max |
3.4 |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, GC |
-5
to +30 |
21.6 |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, LB |
0
to +30 |
9.88 |
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A
points, GC |
+2
to -15 |
-3
|
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A
points, LB |
0
to -10 |
-6 |
| Leakage
(ASTM D-4290), G* |
10
max |
6.0 |
| Low
Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40°
F] |
15.5 |
2.3 |
| Water
Spray Off (ASTM D-4049), % max |
NR* |
22.7 |
| *
NR: Not Required for NLGI GC or LB labeling |
|
