|
PRODUCT DESCRIPTION
AMSOIL Antifreeze & Coolant (ANT) is
formulated to provide benefits far beyond those found in
today’s conventional antifreeze and coolant products.
This revolutionary formulation provides maximum antifreeze
and cooling protection in the most extreme temperatures
and operating conditions. And unlike conventional ethylene
glycol based products, which are highly toxic and even fatal,
AMSOIL Antifreeze & Coolant is formulated with propylene
glycol. It is biodegradable and requires no special disposal
costs or procedures in most areas. Above all, its low toxicity
limits the threat to children, pets or wildlife.
AMSOIL Antifreeze & Coolant provides
even greater benefits:
Lasts Longer
AMSOIL Antifreeze & Coolant contains
a proprietary poly organic acid technology. It eliminates
the need for supplemental coolant additives and recharging
cooling systems. AMSOIL Antifreeze & Coolant provides
extended service life in all gasoline and diesel vehicles.
It can be used for seven years or 250,000 miles in passenger
cars, light-duty trucks, vans and recreational vehicles.
It lasts seven years or 750,000 miles in over-the-road diesel
trucks. Also for motorcycles, ATVs, snowmobiles and closed
marine applications. AMSOIL Antifreeze and Engine Coolant
lasts longer than conventional products.
Compatible With Other Fluids
AMSOIL Antifreeze & Coolant is dyed
neutral yellow and is compatible with all ethylene and propylene
antifreeze and coolant formulations on the market, including
DEX-Cool®, Sierra® and Zerex®. It is also compatible
with fully formulated diesel antifreezes and other organic
acid technology (OAT) and hybrid organic acid technology
(HOAT) formulations.
Stops Leaks
AMSOIL Antifreeze & Coolant adheres
to metal. It self-seals hairline cracks in welds and seams
to prevent leaks, without additional stop-leak products
or fibrous materials.
Prevents Metallic Corrosion
Independent tests reveal AMSOIL Antifreeze
& Engine Coolant surpassed standards for metallic corrosion.
It plates metal to protect even when exposed to acids and
salt spray. Standard allowances for loss in aluminum and
solder are less than 60 mg. AMSOIL Antifreeze & Engine
Coolant lost 0 mg in aluminum and less than 6 mg in solder.
Standards for iron, steel, copper and brass allow a maximum
loss of less than 20 mg. AMSOIL Antifreeze & Engine
Coolant never exceeded a 3 mg loss in any of those metals
in a testing period that was run for 10 weeks, three weeks
longer than required tests.
• Formulated for heavy duty and automotive
applications
• Also good for motorcycles, ATVs,
snowmobiles and some marine applications
• Extended drain intervals
Up to seven years or 750,000 miles in
Class 8 vehicles
Up to seven years or 250,000 miles in
pleasure vehicles
• Universal compatibility
• Safe, biodegradable, non-toxic,
non-polluting
• Aluminum engine block compatible
Meets Automotive and Heavy Duty Service
Specifications:
• ASTM D-6210 • ASTM D-3306 •
ASTM D4985-98 • ASTM D 6210-98
Composition by Weight:
Total glycols, = 92 percent
Corrosion inhibitors and antifoamants,
= 3 percent
Water, > 5 percent
Boiling Point (sea level):
219° F at 40 percent concentration,
222° F at 50 percent, 225° F at 60 percent; increase
by 40° to 45° F if a 15 psi radiator cap is used.
|
