|
AMSOIL High Tack
Foam Filter Oil
AMSOIL Foam Filter
Oil has long provided users of AMSOIL air filters with a
high level of air flow and superior particle removal. Now,
five years of research, testing and development have yielded
a new and improved Foam Filter Oil formulation. New AMSOIL
High Tack Foam Filter Oil is a special blend of synthetic
polymers that allows maximum air flow and increased particle
removing efficiency and capacity. High Tack Foam Filter
Oil stays in place throughout service life, resists washout
from carburetor fogging and will not plug foam filter cells,
while its new red color helps ensure even oil coverage across
the entire filter.
 AMSOIL
High Tack Foam Filter Oil was tested with AMSOIL 2-Stage
Foam Filter media under the SAE J726 test methodology, yielding
an efficiency rating of 99.5 percent. High particle removing
efficiency is critical in preventing engine wear, keeping
equipment running at peak efficiency and improving fuel
efficiency.
AMSOIL High Tack
Foam Filter Oil is available in its traditional form and
a new and convenient aerosol spray. Because it offers users
quick and convenient application, the new spray formulation
is a boon for power sports enthusiasts.
Applying High Tack
Foam Filter Oil
For best performance, apply a generous amount of High Tack
Foam Filter Oil and work it into the foam media. Squeeze
out excess oil, leaving a uniformly oiled filter.
A properly oiled
filter will feel oily or tacky to the touch on both the
outer and inner surfaces, but should not be dripping oil.
When reinstalling
the air filter, apply a thin film of AMSOIL Multi-Purpose
Grease on the foam base to insure a leak free seal between
the filter and housing.
|
