 |
         |
| |
|
|
 |
|
| |
|
 AMSOIL
Motor Oils
Lawn care equipment operating temperatures,
especially with air-cooled engines, can rise quite high,
jeopardizing equipment life. In addition, conventional petroleum
motor oils also become quite hot and quickly experience
oxidative and thermal breakdown, resulting in premature
engine wear.
AMSOIL Motor Oils are ideal for use in commercial
lawn care equipment, including tractors, mowers, sweepers
and sod cutters. AMSOIL Synthetic Motor Oils provide a wide
range of protection for four-cycle engines, avoiding oxidative
and thermal breakdown in high temperature, high RPM conditions
and maintaining their lubricating and cooling abilities.
AMSOIL Motor OIls also contain special rust and corrosion
inhibitors to protect engines against condensation and water
even when they're not in use.
|
|
SAE 10W-30 Motor Oil
 AMSOIL
100% Synthetic 10W-30 Motor Oil is designed to provide maximum
benefits in gasoline-fueled engines. AMSOIL 10W-30 resists
high temperature degradation and flows freely in cold conditions
for superior protection against engine wear. AMSOIL 10W-30
also provides maximum power and improved fuel efficiency.
Up
to 25,000-mile or 1-year drain intervals.
Product Code ATM
(for
detailed product info)
|
High Performance
10W-40 Motor Oil
 AMSOIL
High Performance Synthetic 10W-40 Motor Oil is designed
to provide maximum benefits in gasoline and diesel engines.
Product Code: AMO
(for
detailed product info)
|
|
Series 3000 5W-30 Heavy
Duty Diesel Oil
 Fuel
efficient formula for both gasoline and diesel fleets. Deliver
up to 82 percent greater wear protection than other popular
diesel oils. Series 3000 resists oil breakdown from heat,
blow-by chemicals and oxygen up to ten times longer than
conventional oils.
Product Code: HDD
(for
detailed product info)
|
15W-40 Heavy Duty Diesel
and Marine Oil
 The
ultimate in diesel engine protection. Specially blended
long-life formulation resists oxidation and thermal breakdown
- retains viscosity and eliminates sludge and varnish formation.
Designed to deliver 1,000,000 miles in over the road trucks
before engine overhaul.
Product Code: AME
(for
detailed product info)
|
|
Four-Cycle Applications
Many four-cycle lawn equipment applications
do not include oil filters, so oil dispersants must keep
contaminants and wear particles suspended in the oil until
it is drained. As petroleum oil breaks down, these cleaning
additives are quickly depleted, causing deposits and sludge
to build up and resulting in premature engine wear.
The thermal and oxidative stability of AMSOIL
Synthetic Motor OIls make them ideal for the high heat and
RPMs of four-cycle engines. They sagely hold contaminants
in suspension, while their superior ability to reduce frictiona
and wear keeps engines in top condition. AMSOIL Motor Oils
also contain an advanced, rust-prevention additive package
that protets engines against condensation and water even
ehen they're not in use. Use AMSOIL 0W-40 Formula 4-Stroke
Synthetic Motor Oil to replace manufacturer recommended
SAE 30 oils.
|
|
Formula
4-Stroke® Power Sports Synthetic Motor Oil
 AMSOIL
Formula 4-Stroke® Power Sports 0W-40 Synthetic Motor Oil
is specially formulated for ATVs, snowmobiles and other
power sports applications. Its broad viscosity range and
wax-free formulation make it excellent for use in both hot
and cold temperature extremes.
Product Code: AFF
(for
detailed product info)
|
 |
|
 |
| |
|
 Two-Cycle
Applications
Two-cycle engines power
a variety of lawn and garden equipment, from trimmers and
blowers, to lawnmowers, tillers and chainsaws. Due to their
small size and high-revving operation, two-cycle engines
need a superior lubricant that will cool and lubricate under
the most stressful operating conditions.
The synthetic formulation
of AMSOIL
2-Cycle Oils provides cool operation in the hottest conditions,
while their superior lubricity and film strength protects
engine components against friction and wear far better than
petroleum lubes can.
AMSOIL 2-Cycle
Oils also solve the exhaust problems associated with using
petroleum two-cycle oils. AMSOIL
2-Cycle Oils are formulated to mix leaner in the gas and
burn cleanly, reducing plug-fouling, exhaust smoke, smell
and pollution, while improving engine performance.
|
|
Dominator 2-Cycle Racing Oil
 New
AMSOIL DOMINATOR Synthetic 2-Cycle Racing Oil is a robust
formulation specially engineered for unsurpassed protection
in high performance two-cycle motors, both on and off the
track. It contains heavier synthetic base oils that provide
more lubricity for "on the edge" operation. DOMINATOR reduces
friction and protects pistons and bearings subjected to
the rigors of racing. DOMINATOR contains the right additives
for clean motor operation.
Product Code: TDR
(click
for product details)
|
Interceptor High Performance Synthetic
2-Cycle Oil
 AMSOIL
INTERCEPTOR Synthetic 2-Cycle Oil is formulated with a proprietary
blend of the finest synthetic base oils and additives available
today. This unique AMSOIL chemistry represents a breakthrough
development in the field of two-cycle engine lubrication.
Product Codes: AIT
(click
for product details)
|
|
HP 2-Cycle Injector Oil
 New
AMSOIL HP Injector Synthetic 2-Cycle Oil is a precise synthetic
formulation that exceeds the lubrication demands of modern
two-cycle engines. It contains premium synthetic base oils
and MAX-DOSE additive system, providing superior performance
in direct fuel injected (DFI), electronic fuel injected
(EFI) and carbureted outboard motors, as well as other recreational
two-cycle equipment.
Product Codes: HPI
(click
for product details)
|
Saber 2-Cycle Oil, 100:1 Pre-Mix
 New
AMSOIL Saber Professional Synthetic 2-Cycle Oil is specifically
designed for lean mix ratios in pre-mix applications.
Saber Professional
contains high temperature detergents for small power equipment.
Extensive testing shows superior lubricity and cleanliness
properties at lean mix ratios with this premium synthetic
formulation.
Product Codes: ATP
(click
for product details)
|
|
 |
| |
|
Synthetic Gear Lubes
AMSOIL
provides the long-lasting protection, fuel efficiency and
dependability needed for top performance, even in extreme-pressure
conditions. Stays fluid in cold temperatures for easy cold
weather shifting.
|
|
SEVERE GEAR Synthetic Extreme Pressure
75W-90 Gear Lube
 AMSOIL
SEVERE GEAR™ provides performance beyond that possible with
conventional gear oil. These AMSOIL custom products offer
superior gear and bearing protection, better friction and
heat reduction, increased efficiency and extended service
life.
Product Code: SVG
(click
for product details)
|
SEVERE GEAR Synthetic Extreme Pressure
75W-110 Gear Lube
 AMSOIL
SEVERE GEAR™ provides performance beyond that possible with
conventional gear oil. These AMSOIL custom products offer
superior gear and bearing protection, better friction and
heat reduction, increased efficiency and extended service
life.
Product Code: SVT
(click
for product details)
|
|
Long Life 75W-90 Synthetic Gear
Lube
 Specifically
engineered for extended drain intervals up to 500,000 miles
as set by equipment manufacturers for over-the-road trucks
and heavy equipment. Prevents wear and improves equipment
life. Excellent "All Season" summer and winter performance.
Outperforms all conventional gear oils. Also excellent for
passenger cars and trucks. Compatible with most limited-slip
differentials.
Product Code: FGR
(click
for product details)
|
SAE 80W-90 Gear Lube
 High
quality replacement for applications specifying SAE 80W-90
conventional gear lube. Synthetic construction provides
improved cold flow properties, high viscosity index and
heat resistance. Contains an over treat of high quality
additives, exceeding the minimum standards.
Product Code: AGL
(click
for product details)
|
|
Series 2000 Chaincase Lubricant
 AMSOIL
Series 2000 Chaincase Lubricant provides superior protection
and performance for enclosed chains. Ideal for snowmobiles,
ATVs and general equipment. Extreme pressure additives provide
extra wear protection. Extends chain life repels water,
and inhibits rust, oxidation and foam. Superior low temperature
starting, performance and protection.
Product Code: TCC
(click
for product details)
|
|
|
 |
| |
|
 AMSOIL
Multi-Purpose Synthetic Hydraulic/Transmission Fluid is
specifically designed for outstanding performance in modern
tractors and hydrostatic drive machinery. Whether it is
used in the transmission, final drive, or in the hydraulic
system, AMSOIL Hydraulic/Transmission Fluid delivers superior
protection and service: better lubrication for less wear,
more positive control and reliability; longer service life
for cost savings (in replacement fluid and time spent away
from the field); vastly superior cold and hot temperature
performance for easy cold weather start-ups, faster warm-ups
and overall cooler operation.
|
|
Tractor Hydraulic/Transmission Fluid
 AMSOIL
Synthetic Tractor Hydraulic/Transmission Oil is the modern
lubricant for modern farm and industrial equipment. Engineered
specifically to meet the tough applications of heavy-duty,
hydraulic-powered operations. Provides exceptional lubrication
to reduce wear, resist heat, protect against rust and extend
fluid and equipment service life.
Product Code: ATH
(click
for product details)
|
Automatic Transmission Fluid
 Improves
fuel efficiency, reduces transmission temperatures and increases
transmission life. Provides unsurpassed thermal stability
and up to five times the service life of conventional ATFs.
Delivers maximum protection for towing and other severe-duty
applications.
Product Code: ATF
(click
for product details)
|
|
Torque-Drive Automatic Transmission Fluid
 Delivering
the ultimate in oxidation resistance, wear control and friction
performance, AMSOIL Torque-Drive extends lubricant life
up to six times and provides protection beyond that possible
from conventional ATF's.
Product Code: ATD
(click
for product details)
|
|
|
Allison® transmission owners are being
held hostage. They are being forced to purchase a
transmission fluid that is costing more money than
they should be spending. They do, however, have options.
Allison® transmission has established
the Technical Engineering Specification 295 (TES 295)
for automatic transmission fluids. When TES 295 products
are used in Allison® transmissions and according to
Allison® recommendations as outlined in Allison® Service
Information Letter 10-TR-99, Rev. B, the service life
of these oils can be extended several times that of
mineral oils. This extended drain recommendation saves
money for Allison® transmission owners.
The only oil on the market, however,
that is formally identified by Allison® as a TES 295
product is TranSynd® Automatic Transmission Fluid,
which happens to be sold by Allison® in partnership
with Castrol®. Other companies seeking TES 295 approval
are faced with formidable obstacles. Allison® has
not made its stationary test stand available to the
competition and has not established formalized field
trial protocol. Outside companies, therefore, without
unreasonably heavy investments in an ambiguous test
program, are locked out of the market. And Allison®,
by positioning itself as the only player, is able
to charge exorbitant prices for their product. As
a result, Allison® transmission owners who want to
benefit from the potential savings realized through
extended drain intervals are being taken advantage
of.
In response, AMSOIL closely examined
TranSynd® and developed a cost-effective replacement
product named Torque-Drive™. Torque-Drive™ is a premium
synthetic transmission fluid based on the same type
of chemistry as TranSynd®. This is supported by the
infrared (IR) scan and physical data comparisons included
here. Clearly, the testing shows no measurable performance
differences between Torque-Drive™ and TranSynd®. They
do, however, differ in cost. Allison® transmission
owners save money with Torque-Drive™.
The Allison® extended warranty states
that Allison® will only cover repairs in which the
transmission had been operated with TranSynd® or an
equivalent fluid which meets the TES 295 specification.
Torque-Drive™ is, in fact, based on the same type
of chemistry as TranSynd® and is, therefore, recommended
by AMSOIL as a replacement for TranSynd® and for use
in all TES 295 applications. And because it is not
specifically designated by Allison® as a TES 295 product,
the AMSOIL warranty is in place to cover all lubricant
related failures.
All Allison® transmission owners would
be wise to reevaluate their use of TranSynd®, as well
as their investment in the Allison® extended warranty
program. There is no justification for paying the
high cost for TranSynd® when an equivalent product
is available for less.
|
|
|
 |
| |
|
 AMSOIL
greases provide superior protection and friction
reduction under both normal and severe operating conditions.
The AMSOIL
greases can be counted on to remain in the
places that they are needed and to provide stable overall
lubricationin even the most severe service conditions. Tests
prove once again that AMSOIL
greases are the best way to protect and prolong the life
of industrial and automotive equipment.
- Greater
Load Carrying Ability
- Added Wear Protection
- Broader Temperature
Range Protection
- Longer Service Life
- Greater Storage Stability
|
|
Heavy Duty Grease
 Extreme-pressure,
moly-fortified. Provides outstanding protection for four
wheel drive steering knuckles, spring shackles and other
components operating in high-load, low-speed conditions.
Product Code: GHB, GHD
(click
for product details)
|
Multi-Purpose
Grease
 Reduces
friction and wear in high-speed/high-temperature components
such as automotive wheel bearings and electric motors. It
keeps components running clean and trouble-free for outstanding
performance and long life.
Product Codes: GLA, GLB, GLC
(click
for product details)
|
|
Water Resistant Grease
 Resists
water washout and degradation. Unparalleled protection for
boat trailer wheel bearings and other components frequently
exposed to water.
Product Code: GWR
(click
for product details)
|
Synthetic Blend Bar and Chain Oil
 Clings
to metal surfaces better than other oils. Delivers unparalleled
lubrication and protection.
Product Code: ABC
(click
for product details)
|
|
Fifth Wheel and Open Gear Compound
 AMSOIL
Fifth Wheel and Open Gear Compound is based on proprietary
technology that does not use asphaltic materials, residual
compounded oils or diluent solvents as part of the lubricant
formulation. It provides excellent adhesion to surfaces,
resistance to water washout and protection against rust,
corrosion, and wear. It is an aerosol spray product, making
application quick, easy, neat and economical.
Product Code: GFW
(click
for product details)
|
|
|
 |
| |
|
Compared to microscopic dirt particles,
your engine is a Goliath, roaring with heat and energy as
it converts fuel into raw horsepower. But despite all this
power, your engine is extremely vulnerable to the threat
of microscopic engine dirt. In fact, if unchecked, this
tiny menace will dramatically erode your engine's performance
and can eventually cripple it beyond repair.
AMSOIL Oil and Air Filters are the
key to preventing costly repairs caused by engine dirt.
Filtration is simply a method of removing contaminants by
trapping and holding them outside the system of oil circulation.
In order for filtration to be truly effective, however,
it must be able to capture contaminants of all types and
sizes.
AMSOIL has developed a complete line of
sophistciated filtration products designed to offer the
best protection available against virtually all harmful
engine contaminants.
|
|
AMSOIL Introduces
Ea Oil Filters with Nanofiber Technology!
Another Revolutionary
Step for Automotive and Light Truck Applications
AMSOIL INC. of Superior,
WI announces the introduction of its new Ea Oil Filter line
featuring advanced full synthetic nanofiber technology.
The new Ea Oil Filters tout improved lubricant flow, improved
cold-start performance, reduced operating costs and extended
service intervals. AMSOIL Ea Oil Filters are the highest
efficiency filters on the market for automotive and light
truck applications.
AMSOIL is the first in the industry to
offer a full synthetic media in a cartridge style filter.
The Ea synthetic media is made of fibers with a controlled
size and shape that are significantly smaller in diameter
than conventional filters. Extensive testing shows that
AMSOIL Ea Oil Filters provide a near perfect absolute efficiency
rating.
|
|
AMSOIL Ea Oil Filters
Continuing on the path to revolutionize the filtration market,
AMSOIL is introducing the new Ea Oil Filter line. Ea Oil
Filters feature advanced full synthetic nanofiber technology,
making them the highest efficiency filters that are available
for the auto/light truck market.
Product Code: EAO
(click
for product details)
|
Ea Spin-On By-Pass Filters
 AMSOIL
Ea Spin-On By-Pass Filters offer the ultimate in filtration
technology. Engine wear is caused by dirt particles larger
than 5 microns. The AMSOIL Ea By-Pass Oil Filter removes
particles less than 1 micron, virtually eliminating engine
wear. AMSOIL Ea By-Pass Oil Filters filter all the oil in
a six-quart system in about five minutes at an average engine
speed equivalent to 45 mph.
Product Code: BMK-11
(click
for product details)
|
|
Dual-Gard Ea By-Pass Oil Filtration System
 The
Amsoil Dual Gard By-Pass Oil Filtration System treats oil
to ultrafine filtration, which increases engine and oil
life and enhances engine performance.
By-Pass Filter elements
also remove water. Water removal inhibits the formation
of acids, rust and sludge.
Product Code: BMK-12
(click
for product details)
|
Amsoil Dual Remote Oil Filtration System
 The
AMSOIL By-Pass Oil Filter provides the best possible filtration
protection against wear, oil degradation, rust and corrosion.
Working in conjunction with the engine’s full-flow oil filter,
the AMSOIL By-Pass Filter operates by filtering oil on a
"partial-flow" basis. It draws approximately ten percent
of the oil at any one time and traps the extremely small,
wear-causing contaminants and water that full-flow filters
can’t remove. The AMSOIL By-Pass Filter typically filters
all the oil in the system several times an hour, so the
engine continuously receives analytically clean oil.
Product Code: BMK-13, BMK-15, BMK-16
& BMK-17
(click
for product details)
|
|
AMS-Oiler™
 With
an extremely rugged chrome plated hi-grade carbon steel
reservoir and anodized aluminum base, the AMS-Oiler™
is crafted to withstand severe service and to perform reliably
in any personal, commercial or industrial application..
Product Code: AMK-01,
AMK-02
(click
for product details)
|
|
|
AMSOIL Announces Absolute Efficiency
Ea Air Filters (EaA) with Nanofiber Technology for Automotive
and Light Truck Applications
AMSOIL INC. of Superior, WI announces the
introduction of a new premium, high efficiency air filter
utilizing nanofiber technology with a four year/100,000
mile service life guarantee and superior air flow. Positioning
itself to be a world class leader in filtration, the AMSOIL
Ea Filter is incomparable in both design and performance.
In lab testing Ea media with nanofibers
removed 5 times more dust than the average cellulose filter
and 50 times more dust than the average wet gauze media.
Ea media also has 3 times the airflow of cellulose filters
and is equal to wet gauze filters at the very low 0.5 inches
of restriction. The proprietary Ea media held 15 times
more dust than the average wet gauze type filter.
In short, AMSOIL Ea Filters offer superior performance in
the three critical performance benchmarks of efficiency,
flow and capacity.
|
|
AMSOIL Ea Air Filters
 The
introduction of AMSOIL Ea Air Filters represents a major
breakthrough in filtration technology. For the first time,
revolutionary nanofiber technology is available to the auto/light
truck market. Extensive testing proves that AMSOIL Ea Air
Filters are more efficient than cellulose and wet gauze
air filters.
Product Code: EAA
(click
for product details)
|
AMSOIL Ea Air Induction Filters
 AMSOIL's
new line of universal air induction filters are designed
to replace stock oil wetted gauze or foam conical filters
typically supplied by K&N, Injen, Green, AIRAID, AFE, TrueFlow
and more. AMSOIL Ea Air Induction Filters offer superior
efficiency, excellent airflow and are cleanable.
Product Code: EAAU
(click
for product details)
|
|
PowerCore Air Filters
 Premium
filters for Ford 6.0L Diesel PowerStroke™ engine and
the GM H2 Hummer 6.0L Vortec™. The rugged structure
of PowerCore® filters features an innovative, layered,
fluted filter media which allows air to enter an open flute
while forcing it out an adjacent flute, allowing only clean
air into the engine.
Product Code: PCF-60, PCF-H2
(click
for product details)
|
|
|
 |
| |
|
About Donaldson Company, Inc.
Donaldson Company, Inc. is a leading worldwide
provider of filtration systems and replacement parts. Founded
in 1915, Donaldson is a technology-driven company committed
to satisfying customer needs for filtration solutions through
innovative research and development. Donaldson serves customers
in the industrial and engine markets including contamination
control in fluid power systems, bulk fuel and lube filtration,
in-plant air cleaning, compressed air and gas purification,
power generation, disk drive and microelectronics filtration,
off-road equipment and trucks.
|
|
Donaldson Endurance™ Oil Filters
 Donaldson
Endurance lube filters are made using exclusive advanced
synthetic media technologies. Synthetic media technology
delivers cost saving benefits with extended service life,
greater engine protection to prolong engine and equipment
life, improved lubricant flow, improved cold start performance
and reduced operating costs.
Product Code: ELF
(click
for product details)
|
Donaldson Endurance™ Air Filters
 Donaldson
Endurance™ Air Filters with exclusive nanofiber technology
offer longer engine life, longer filter life, initial efficiency
up to 99.99 percent and five times more capacity.
Product Code: EAF
(click
for product details)
|
|
Donaldson P-Series Filters
 AMSOIL
is now introducing the P-Series of Donaldson filters to
complement the Endurance line. The expanded offering of
filtration products features many applications that differ
from, and several that coincide with the Endurance line.
Donaldson P-Series filters offer premium filtration at a
competitive price.
(click
for product details)
|
Donaldson TopSpin™ Filters
 Donaldson
TopSpin™ pre-cleaner air filters extend primary air
filter life, boost system efficiency and extend engine life
in all off-road heavy-duty applications, such as farm equipment,
backhoes, dozers and more.
(click
for product details)
|
|
 |
| |
|
Anti-Wear Hydraulic Oils
 Synthetic
AW Series Antiwear Hydraulic Oils are shear stable, long-life
lubricants based on high quality synthetic oil technology.
These oils are formulated with a premium additive system
that inhibits oxidation (preventing acid and viscosity increase),
inhibits rust, and inhibits foam (preventing spongy hydraulics).
Product Codes: AWF, AWG, AWH, AWI, AWJ, AWK
(click
for product details)
|
Thermally Stable Biodegradable Hydraulic
Oil
 AMSOIL
TBI hydraulic oil is a premium lubricant designed to biodegrade
to its natural state when subjected to sunlight, water and
microbial activity. TBI has a very low toxicity level because
the oil is formulated with ashless additives that do not
contain heavy metals.
Product Code: TBI
(click
for product details)
|
|
 |
| |
| AMSOIL's
selection of quality fuel additives will make your engine
breath easier and work more efficiently. The quality of the
fuel your engine runs on greatly determines its power and
responsiveness. Use these products to clean your engine while
you work, and make sure your engine is getting the nutrients
it needs to operate at peak performance. |
|
PI Performance Improver Gasoline Additive
 Ideal
for both fuel injected and carbureted systems. Dissolves
and removes fuel system deposits and other contaminants
for improved power and overall performance in gasoline engines.
Improves engine idle, response and starting.
Product Code: API
(click
for product details)
|
Gasoline Stabilizer
 AMSOIL
Gasoline Stabilizer keeps fuel from deteriorating during
storage. Reduces the oxidation process and prevents varnish
and gum build-up in gasoline. These contaminates can clog
injectors, stick floats and cause poor engine startup. Allows
easier start-ups.
Product Code: AST
(click
for product details)
|
|
Series 2000 Octane Boost
 Improves
the performance of all two-cycle and four-cycle gasoline-fueled
engines. Just one treatment significantly increases engine
response and power. AMSOIL Octane Boost reduces engine knock,
improves ignition, helps fuel burn cleaner and inhibits
corrosion. Recommended for all high performance off-road
and racing applications. Increases octane number by up to
7 points.
Product Code: AOB
(click
for product details)
|
Diesel Fuel Modifier
(light-duty diesel engines)
 Improves
combustion, fuel efficiency, cold-weather starting, power
and performance. Cleans injectors, fuel screens, pumps and
filters. For use in diesel-powered cars and light-duty trucks.
Treats up to 40 gallons.
Product Code: ADM
(click
for product details)
|
|
Diesel Fuel Additive Concentrate
 All-season
performance. Lowers diesel fuel gel point by 20° to
35° F, depending on mix ratio. Improves the performance,
fuel efficiency and longevity of diesel engines while reducing
deposits, black smoke, emissions and injector wear. For
use in heavy-duty diesel engines. Treats up to 100 gallons.
Product Code: ADC
(click
for product details)
|
Cold Flow Improver
 A
premium fuel additive that lowers diesel fuel cold flow
properties as much as 20°F (11°C).
Product Code: DFF
(click
for product details)
|
|
 |
| |
| In
addition to creating the finest synthetic lubrication products
available, AMSOIL also stocks
a variety of quality products to protect and maintain your
equipment. These specialty lubes and fluids provide additional
levels of protection for every aspect of your lawn & garden
machinery. Trust AMSOIL to deliver
the complete care your equipment deserves. |
|
MP Metal Protector
 AMSOIL
Metal Protector is a synthetic, greaseless all-purpose lubricant
that provides metal surfaces with a long-lasting film. Its
penetrating agents cut through rust and corrosion to allow
free movement of hardware parts. Effective in applications
as diverse as hardware, household appliances, sporting goods
and electrical equipment.
Product Code: AMP
(click
for product details)
|
MPHD Heavy Duty Metal Protector
 AMSOIL
Heavy Duty Metal Protector is the product of choice for
metal surfaces that require a heavy duty lubricant or are
exposed to the damaging effects of salt, moisture or chemical
corrosion. It is ideal for hinges, wire ropes and springs,
nuts and bolts, motorcycle or bicycle chains, and for undercoating
car doors, wheelwells, rocker panels, seams and other metal
surfaces exposed to water, dirt or road salt.
Product Code: AMH
(click
for product details)
|
|
Power Foam Engine Cleaner and Degreaser
 Cleans
entire combustion intake system for improved engine performance.
Removes gum, varnish and carbon deposits for better fuel
economy and improved overall engine performance. Cleans
intake valves, intake manifolds and throttle plates to keep
the combustion intake system running at peak efficiency.
Effective in both two-cycle and four-cycle engines.
Product Code: APF
(click
for product details)
|
Silicone Spray Lubricant
 Perfect
for use on surfaces which may be damaged by conventional
lubricants such as grease or oil. Protects with a dry lubricating
film. Helps prevent the cracking and drying of rubber. Displaces
water and makes an excellent mold release lubricant. May
be used where light duty or silicone lubricants are recommended.
Product Code: ALS
(click
for product details)
|
|
Engine Flush
 AMSOIL
Fast Acting Engine Flush is made from a carefully selected
blend of solvents and special cleaning agents that dissolve
and disperse harmful deposits formed in the crankcase, cylinder
walls, pistons and rings of an internal combustion engine.
When used as directed, it cleans and restores operating
efficiency to valves, valve lifters, rocker arms, and pistons
for improved horsepower, fuel economy, and performance.
Product Code: AEF
(click
for product details)
|
|
|
| |
return
to top |
| |
|
|
|
Commercial
Applications