 |
       |
| |
|
|
 |
|
| |
|
AMSOIL Synthetic Diesel Motor Oils help decrease downtime
and increase profits.
 Wear
Control -
AMSOIL synthetic diesel motor oils have been proven to keep
wear rates lower than conventional oils do. Synthetic basestocks
reduce friction more effectively than conventional basestocks
do, which lowers wear rates and helps keep engine heat from
climbing excessively. Outstanding quality antiwear additives
protect surfaces from wear in conditions in which a full
lubricating film does not develop.
Low Temperature Fluidity -
AMSOIL synthetic diesel motor
oils remain
fluid in low temperatures. Low temperature fluidity helps
engines start in cold temperatures and ensures rapid cold-temperature
post-startup protection.
Fuel Economy -
AMSOIL synthetic diesel motor oils' low coeffiicient
of friction improves fuel economy by reducing the loss of
power to friction. Fuel economy increases of five percent
are common with AMSOIL synthetic diesel motor oils.
Extended Drain Intervals -
Fleet demonstrations show AMSOIL
synthetic diesel motor oils protect
engines more effectively for extended drain intervals than
conventional oils do for conventional drain intervals. Many
truckers use AMSOIL synthetic diesel motor oils indefinitely,
using oil analysis as their guide to oil changes.
|
|
Series 3000 5W-30 Heavy
Duty Diesel Oil
 Fuel
efficient formula for both gasoline and diesel fleets. Deliver
up to 82 percent greater wear protection than other popular
diesel oils. Series 3000 resists oil breakdown from heat,
blow-by chemicals and oxygen up to ten times longer than
conventional oils.
Product Code: HDD
(for
detailed product info)
|
High Performance 10W-40
Motor Oil
 AMSOIL
High Performance Synthetic 10W-40 Motor Oil is designed
to provide maximum benefits in gasoline and diesel engines.
Product Code: AMO
(for
detailed product info)
|
| High Performance
20W-50 Motor Oil
 AMSOIL
High Performance Synthetic 20W-50 Motor Oil is designed
to provide maximum benefits in gasoline and diesel engines.
Product Code: ARO
(for
detailed product info)
|
15W-40 Heavy Duty Diesel
and Marine Oil
 The
ultimate in diesel engine protection. Specially blended
long-life formulation resists oxidation and thermal breakdown
- retains viscosity and eliminates sludge and varnish formation.
Designed to deliver 1,000,000 miles in over the road trucks
before engine overhaul.
Product Code: AME
(for
detailed product info)
|
|
Synthetic 10W-30/SAE
30 Heavy Duty Diesel Oil
 Where
these viscosity grades are specified, AMSOIL Synthetic 10W-30/SAE
30 Diesel Oil (ACD) provides outstanding performance as
a straight-grade SAE 30 for older two- and four-stroke diesels
and as a multi-grade SAE 10W-30 in modern four-stroke diesels
as well as gasoline engines. AMSOIL ACD is ideal for use
in a wide variety of light and heavy-duty applications,
including agriculture, off-road construction, trucking,
mining, industrial (pumps and generators) and personal automotive
or commercial transportation.
Product Code: ACD
(for
detailed product info)
|
|
|
 |
| |
|
AMSOIL Synthetic Gear Lubes keep truck differentials
and EP gear lube equipped transmissions running clean, protected
and at top-efficiency.
 AMSOIL
synthetic gear lubes are formulated to protect gears operating
in heavily loaded conditions, whether or not the gears operate
with full film lubrication. Superior film strength and viscosity
retention offer superior portection in full film regimes,
while top-quality extreme pressure agents protect when a
full lubricating film does not separate gear surfaces.
The thermal durability of AMSOIL synthetic
gear lubes ensures extreme pressure protection after extended
exposure to extreme temperatures. The extreme pressure agents
in conventional gear lubes sometimes lose their effectiveness
after extended exposure to high temperatures, leaving gears
vulnerable to metal-to-metal contact and wear.
AMSOIL SEVERE GEAR ™ Synthetic Gear Lubes
AMSOIL SEVERE GEAR ™ Synthetic Gear
Lubes are formulated with superior "film strength"
and extra additives to protect gears and bearings from scoring
and wear, and they effectively resist high heat and possess
excellent cold flow properties. SEVERE GEAR ™ Synthetic
Gear Lubes outperform all conventional gear oils and are
recommended for all types of vehicles such as turbo diesel
pick-ups, SUVs, autos, trucks, heavy equipment and motor
homes. Compatible with most limited-slip differentials.
|
|
SEVERE GEAR Synthetic Extreme Pressure
75W-90 Gear Lube
 AMSOIL
SEVERE GEAR™ provides performance beyond that possible with
conventional gear oil. These AMSOIL custom products offer
superior gear and bearing protection, better friction and
heat reduction, increased efficiency and extended service
life.
Product Code: SVG
(click
for product details)
|
SEVERE GEAR Synthetic Extreme Pressure
75W-110 Gear Lube
 AMSOIL
SEVERE GEAR™ provides performance beyond that possible with
conventional gear oil. These AMSOIL custom products offer
superior gear and bearing protection, better friction and
heat reduction, increased efficiency and extended service
life.
Product Code: SVT
(click
for product details)
|
|
SEVERE GEAR Synthetic Extreme Pressure
75W-140 Gear Lube
 AMSOIL
SEVERE GEAR™ provides performance beyond that possible with
conventional gear oil. These AMSOIL custom products offer
superior gear and bearing protection, better friction and
heat reduction, increased efficiency and extended service
life.
Product Code: SVO
(click
for product details)
|
Long Life 75W-90 Synthetic Gear
Lube
 Specifically
engineered for extended drain intervals up to 500,000 miles
as set by equipment manufacturers for over-the-road trucks
and heavy equipment. Prevents wear and improves equipment
life. Excellent "All Season" summer and winter performance.
Outperforms all conventional gear oils. Also excellent for
passenger cars and trucks. Compatible with most limited-slip
differentials.
Product Code: FGR
(click
for product details)
|
|
Long Life 80W-140 Synthetic Gear
Lube
 Specifically
engineered for extended drain intervals up to 500,000 miles
as set by equipment manufacturers for over-the-road trucks
and heavy equipment. Prevents wear and improves equipment
life. Excellent "All Season" summer and winter performance.
Outperforms all conventional gear oils. Also excellent for
passenger cars and trucks. Compatible with most limited-slip
differentials.
Product Code: FGO
(click
for product details)
|
SAE 80W-90 Gear Lube
 High
quality replacement for applications specifying SAE 80W-90
conventional gear lube. Synthetic construction provides
improved cold flow properties, high viscosity index and
heat resistance. Contains an over treat of high quality
additives, exceeding the minimum standards.
Product Code: AGL
(click
for product details)
|
|
Slip-Lock Differential Additive
 AMSOIL
Slip-Lock Differential Additive is formulated with advanced
friction modifiers and is designed to eliminate gear-housing
chatter in cars, trucks and SUVs equipped with limited-slip,
positraction and locking differentials. It also reduces
the banging and clunking associated with automatic locking
differentials.
Product Code: ADA
(click
for product details)
|
|
|
 |
| |
 AMSOIL
synthetic extreme pressure lithium complex greases offer
outstanding protection in high load and extreme pressure operations,
due to the great film strenth of synthetic basestocks, the
mechanical stability of lithium complex thickeners and the
protective shield provided by extreme pressure agents. AMSOIL
greases' low coefficient of friction helps keep wear rates
low and fuel efficiency high by minimizing friction and extending
service lives. |
|
Heavy Duty Grease
 Extreme-pressure,
moly-fortified. Provides outstanding protection for four
wheel drive steering knuckles, spring shackles and other
components operating in high-load, low-speed conditions.
Product Code: GHB, GHD
(click
for product details)
|
Multi-Purpose
Grease
 Reduces
friction and wear in high-speed/high-temperature components
such as automotive wheel bearings and electric motors. It
keeps components running clean and trouble-free for outstanding
performance and long life.
Product Codes: GLA, GLB, GLC
(click
for product details)
|
|
Fifth Wheel and Open Gear Compound
 AMSOIL
Fifth Wheel and Open Gear Compound is based on proprietary
technology that does not use asphaltic materials, residual
compounded oils or diluent solvents as part of the lubricant
formulation. It provides excellent adhesion to surfaces,
resistance to water washout and protection against rust,
corrosion, and wear. It is an aerosol spray product, making
application quick, easy, neat and economical.
Product Code: GFW
(click
for product details)
|
PC-Series Compressor Oils
 AMSOIL
Synthetic PC Series oils provide long compressor life through
reduced component wear, corrosion protection, water resistance
and lubricant breakdown resistance. These oils reduce maintenance
costs by extending drain intervals and lowering labor and
used product disposal requirements.
Product Code: PCH, PCI, PCJ, PCK, PCL
(click
for product details)
|
|
PC-Series Compressor Oils
AMSOIL
Synthetic PC Series oils provide long compressor life through
reduced component wear, corrosion protection, water resistance
and lubricant breakdown resistance. These oils reduce maintenance
costs by extending drain intervals and lowering labor and
used product disposal requirements.
Product Code: PCH, PCI, PCJ, PCK, PCL
(click
for product details)
|
|
|
 |
| |
|
Automatic Transmission Fluid
 Improves
fuel efficiency, reduces transmission temperatures and increases
transmission life. Provides unsurpassed thermal stability
and up to five times the service life of conventional ATFs.
Delivers maximum protection for towing and other severe-duty
applications.
Product Code: ATF
(click
for product details)
|
Torque-Drive Automatic Transmission Fluid
 Delivering
the ultimate in oxidation resistance, wear control and friction
performance, AMSOIL Torque-Drive extends lubricant life
up to six times and provides protection beyond that possible
from conventional ATF's.
Product Code: ATD
(click
for product details)
|
|
Powershift Transmission Fluids
 Formulated
for complex, advanced-material power and manual transmissions,
wet-disc brakes and final drives.
Product Code: CTG, CTJ, CTL
(click
for product details)
|
5W-30 Synchromesh Transmission
Fluid
 New
AMSOIL Synthetic Synchromesh Transmission Fluid (MTF) 5W-30
meets and exceeds the gear, bearing, synchromesh and seal
demands found in automobiles and light trucks.
Product Code: MTF
(click
for product details)
|
|
Synthetic Manual Transmission and Transaxle
Gear Lube
 New
AMSOIL Synthetic Manual Transmission and Transaxle Gear
Lube meets and exceeds the gear, bearing, synchromesh and
seal demands found in automobiles and light trucks. Product
Code: MTG
(click
for product details)
|
|
Allison® transmission owners are being
held hostage. They are being forced to purchase a
transmission fluid that is costing more money than
they should be spending. They do, however, have options.
Allison® transmission has established
the Technical Engineering Specification 295 (TES 295)
for automatic transmission fluids. When TES 295 products
are used in Allison® transmissions and according to
Allison® recommendations as outlined in Allison® Service
Information Letter 10-TR-99, Rev. B, the service life
of these oils can be extended several times that of
mineral oils. This extended drain recommendation saves
money for Allison® transmission owners.
The only oil on the market, however,
that is formally identified by Allison® as a TES 295
product is TranSynd® Automatic Transmission Fluid,
which happens to be sold by Allison® in partnership
with Castrol®. Other companies seeking TES 295 approval
are faced with formidable obstacles. Allison® has
not made its stationary test stand available to the
competition and has not established formalized field
trial protocol. Outside companies, therefore, without
unreasonably heavy investments in an ambiguous test
program, are locked out of the market. And Allison®,
by positioning itself as the only player, is able
to charge exorbitant prices for their product. As
a result, Allison® transmission owners who want to
benefit from the potential savings realized through
extended drain intervals are being taken advantage
of.
In response, AMSOIL closely examined
TranSynd® and developed a cost-effective replacement
product named Torque-Drive™. Torque-Drive™ is a premium
synthetic transmission fluid based on the same type
of chemistry as TranSynd®. This is supported by the
infrared (IR) scan and physical data comparisons included
here. Clearly, the testing shows no measurable performance
differences between Torque-Drive™ and TranSynd®. They
do, however, differ in cost. Allison® transmission
owners save money with Torque-Drive™.
The Allison® extended warranty states
that Allison® will only cover repairs in which the
transmission had been operated with TranSynd® or an
equivalent fluid which meets the TES 295 specification.
Torque-Drive™ is, in fact, based on the same type
of chemistry as TranSynd® and is, therefore, recommended
by AMSOIL as a replacement for TranSynd® and for use
in all TES 295 applications. And because it is not
specifically designated by Allison® as a TES 295 product,
the AMSOIL warranty is in place to cover all lubricant
related failures.
All Allison® transmission owners would
be wise to reevaluate their use of TranSynd®, as well
as their investment in the Allison® extended warranty
program. There is no justification for paying the
high cost for TranSynd® when an equivalent product
is available for less.
|
|
|
 |
| |
|
AMSOIL Introduces
Ea Oil Filters with Nanofiber Technology!
Another Revolutionary
Step for Automotive and Light Truck Applications
AMSOIL INC. of Superior, WI announces the
introduction of its new Ea Oil Filter line featuring advanced
full synthetic nanofiber technology. The new Ea Oil Filters
tout improved lubricant flow, improved cold-start performance,
reduced operating costs and extended service intervals.
AMSOIL Ea Oil Filters are the highest efficiency filters
on the market for automotive and light truck applications.
 AMSOIL
is the first in the industry to offer a full synthetic media
in a cartridge style filter. The Ea synthetic media is made
of fibers with a controlled size and shape that are significantly
smaller in diameter than conventional filters. Extensive
testing shows that AMSOIL Ea Oil Filters provide a near
perfect absolute efficiency rating.
|
|
AMSOIL Ea Oil Filters
Continuing on the path to revolutionize the filtration market,
AMSOIL is introducing the new Ea Oil Filter line. Ea Oil
Filters feature advanced full synthetic nanofiber technology,
making them the highest efficiency filters that are available
for the auto/light truck market.
Product Code: EAO
(click
for product details)
|
Ea Spin-On By-Pass Filters
 AMSOIL
Ea Spin-On By-Pass Filters offer the ultimate in filtration
technology. Engine wear is caused by dirt particles larger
than 5 microns. The AMSOIL Ea By-Pass Oil Filter removes
particles less than 1 micron, virtually eliminating engine
wear. AMSOIL Ea By-Pass Oil Filters filter all the oil in
a six-quart system in about five minutes at an average engine
speed equivalent to 45 mph.
Product Code: BMK-11
(click
for product details)
|
|
Dual-Gard Ea By-Pass Oil Filtration System
 The
Amsoil Dual Gard By-Pass Oil Filtration System treats oil
to ultrafine filtration, which increases engine and oil
life and enhances engine performance.
By-Pass Filter elements
also remove water. Water removal inhibits the formation
of acids, rust and sludge.
Product Code: BMK-12
(click
for product details)
|
Amsoil Dual Remote Oil Filtration System
 The
AMSOIL By-Pass Oil Filter provides the best possible filtration
protection against wear, oil degradation, rust and corrosion.
Working in conjunction with the engine’s full-flow oil filter,
the AMSOIL By-Pass Filter operates by filtering oil on a
"partial-flow" basis. It draws approximately ten percent
of the oil at any one time and traps the extremely small,
wear-causing contaminants and water that full-flow filters
can’t remove. The AMSOIL By-Pass Filter typically filters
all the oil in the system several times an hour, so the
engine continuously receives analytically clean oil.
Product Code: BMK-13, BMK-15, BMK-16
& BMK-17
(click
for product details)
|
|
AMS-Oiler™
 With
an extremely rugged chrome plated hi-grade carbon steel
reservoir and anodized aluminum base, the AMS-Oiler™
is crafted to withstand severe service and to perform reliably
in any personal, commercial or industrial application..
Product Code: AMK-01,
AMK-02
(click
for product details)
|
|
|
AMSOIL Announces Absolute Efficiency
Ea Air Filters (EaA) with Nanofiber Technology for Automotive
and Light Truck Applications
AMSOIL INC. of Superior, WI announces the
introduction of a new premium, high efficiency air filter
utilizing nanofiber technology with a four year/100,000
mile service life guarantee and superior air flow. Positioning
itself to be a world class leader in filtration, the AMSOIL
Ea Filter is incomparable in both design and performance.
In lab testing Ea media with nanofibers
removed 5 times more dust than the average cellulose filter
and 50 times more dust than the average wet gauze media.
Ea media also has 3 times the airflow of cellulose filters
and is equal to wet gauze filters at the very low 0.5 inches
of restriction. The proprietary Ea media held 15 times
more dust than the average wet gauze type filter.
In short, AMSOIL Ea Filters offer superior performance in
the three critical performance benchmarks of efficiency,
flow and capacity.
|
|
AMSOIL Ea Air Filters
 The
introduction of AMSOIL Ea Air Filters represents a major
breakthrough in filtration technology. For the first time,
revolutionary nanofiber technology is available to the auto/light
truck market. Extensive testing proves that AMSOIL Ea Air
Filters are more efficient than cellulose and wet gauze
air filters.
Product Code: EAA
(click
for product details)
|
AMSOIL Ea Air Induction Filters
 AMSOIL's
new line of universal air induction filters are designed
to replace stock oil wetted gauze or foam conical filters
typically supplied by K&N, Injen, Green, AIRAID, AFE, TrueFlow
and more. AMSOIL Ea Air Induction Filters offer superior
efficiency, excellent airflow and are cleanable.
Product Code: EAAU
(click
for product details)
|
|
PowerCore Air Filters
 Premium
filters for Ford 6.0L Diesel PowerStroke™ engine and
the GM H2 Hummer 6.0L Vortec™. The rugged structure
of PowerCore® filters features an innovative, layered,
fluted filter media which allows air to enter an open flute
while forcing it out an adjacent flute, allowing only clean
air into the engine.
Product Code: PCF-60, PCF-H2
(click
for product details)
|
|
|
 |
| |
|
About Donaldson Company, Inc.
Donaldson Company, Inc. is a leading worldwide
provider of filtration systems and replacement parts. Founded
in 1915, Donaldson is a technology-driven company committed
to satisfying customer needs for filtration solutions through
innovative research and development. Donaldson serves customers
in the industrial and engine markets including contamination
control in fluid power systems, bulk fuel and lube filtration,
in-plant air cleaning, compressed air and gas purification,
power generation, disk drive and microelectronics filtration,
off-road equipment and trucks.
|
|
Donaldson Endurance™ Oil Filters
 Donaldson
Endurance lube filters are made using exclusive advanced
synthetic media technologies. Synthetic media technology
delivers cost saving benefits with extended service life,
greater engine protection to prolong engine and equipment
life, improved lubricant flow, improved cold start performance
and reduced operating costs.
Product Code: ELF
(click
for product details)
|
Donaldson Endurance™ Air Filters
 Donaldson
Endurance™ Air Filters with exclusive nanofiber technology
offer longer engine life, longer filter life, initial efficiency
up to 99.99 percent and five times more capacity.
Product Code: EAF
(click
for product details)
|
|
Donaldson P-Series Filters
 AMSOIL
is now introducing the P-Series of Donaldson filters to
complement the Endurance line. The expanded offering of
filtration products features many applications that differ
from, and several that coincide with the Endurance line.
Donaldson P-Series filters offer premium filtration at a
competitive price.
(click
for product details)
|
|
|
 |
| |
|
PI Performance Improver Gasoline Additive
 Ideal
for both fuel injected and carbureted systems. Dissolves
and removes fuel system deposits and other contaminants
for improved power and overall performance in gasoline engines.
Improves engine idle, response and starting.
Product Code: API
(click
for product details)
|
Gasoline Stabilizer
 AMSOIL
Gasoline Stabilizer keeps fuel from deteriorating during
storage. Reduces the oxidation process and prevents varnish
and gum build-up in gasoline. These contaminates can clog
injectors, stick floats and cause poor engine startup. Allows
easier start-ups.
Product Code: AST
(click
for product details)
|
|
Series 2000 Octane Boost
 Improves
the performance of all two-cycle and four-cycle gasoline-fueled
engines. Just one treatment significantly increases engine
response and power. AMSOIL Octane Boost reduces engine knock,
improves ignition, helps fuel burn cleaner and inhibits
corrosion. Recommended for all high performance off-road
and racing applications. Increases octane number by up to
7 points.
Product Code: AOB
(click
for product details)
|
Diesel Fuel Modifier
(light-duty diesel engines)
 Improves
combustion, fuel efficiency, cold-weather starting, power
and performance. Cleans injectors, fuel screens, pumps and
filters. For use in diesel-powered cars and light-duty trucks.
Treats up to 40 gallons.
Product Code: ADM
(click
for product details)
|
|
Diesel Fuel Additive Concentrate
 All-season
performance. Lowers diesel fuel gel point by 20° to
35° F, depending on mix ratio. Improves the performance,
fuel efficiency and longevity of diesel engines while reducing
deposits, black smoke, emissions and injector wear. For
use in heavy-duty diesel engines. Treats up to 100 gallons.
Product Code: ADC
(click
for product details)
|
Cold Flow Improver
 A
premium fuel additive that lowers diesel fuel cold flow
properties as much as 20°F (11°C).
Product Code: DFF
(click
for product details)
|
|
Cetane Boost Diesel Fuel Additive (all
diesel engines)
 Improves
combustion efficiency to increase power in diesel engines.
Raises cetane three to seven numbers. Also improves low-temperature
starting, fuel ignition quality and reliability. Treats
up to 200 gallons.
Product Code: ACB
(click
for product details)
|
|
|
 |
| |
|
MP Metal Protector
 AMSOIL
Metal Protector is a synthetic, greaseless all-purpose lubricant
that provides metal surfaces with a long-lasting film. Its
penetrating agents cut through rust and corrosion to allow
free movement of hardware parts. Effective in applications
as diverse as hardware, household appliances, sporting goods
and electrical equipment.
Product Code: AMP
(click
for product details)
|
MPHD Heavy Duty Metal Protector
 AMSOIL
Heavy Duty Metal Protector is the product of choice for
metal surfaces that require a heavy duty lubricant or are
exposed to the damaging effects of salt, moisture or chemical
corrosion. It is ideal for hinges, wire ropes and springs,
nuts and bolts, motorcycle or bicycle chains, and for undercoating
car doors, wheelwells, rocker panels, seams and other metal
surfaces exposed to water, dirt or road salt.
Product Code: AMH
(click
for product details)
|
|
Power Foam Engine Cleaner and Degreaser
 Cleans
entire combustion intake system for improved engine performance.
Removes gum, varnish and carbon deposits for better fuel
economy and improved overall engine performance. Cleans
intake valves, intake manifolds and throttle plates to keep
the combustion intake system running at peak efficiency.
Effective in both two-cycle and four-cycle engines.
Product Code: APF
(click
for product details)
|
Engine Flush
 AMSOIL
Fast Acting Engine Flush is made from a carefully selected
blend of solvents and special cleaning agents that dissolve
and disperse harmful deposits formed in the crankcase, cylinder
walls, pistons and rings of an internal combustion engine.
When used as directed, it cleans and restores operating
efficiency to valves, valve lifters, rocker arms, and pistons
for improved horsepower, fuel economy, and performance.
Product Code: AEF
(click
for product details)
|
|
Propylene Glycol Antifreeze and Engine
Coolent
 AMSOIL Antifreeze & Coolant is newly formulated to provide benefits far beyond those found in today's conventional antifreeze and coolant products. This revolutionary formulation provides maximum antifreeze and cooling protection in the most extreme temperatures and operating conditions.
Product Code: ANT
(click
for product details)
|
Silicone Spray Lubricant
 Perfect
for use on surfaces which may be damaged by conventional
lubricants such as grease or oil. Protects with a dry lubricating
film. Helps prevent the cracking and drying of rubber. Displaces
water and makes an excellent mold release lubricant. May
be used where light duty or silicone lubricants are recommended.
Product Code: ALS
(click
for product details)
|
|
| |
return
to top |
| |
|
|
|
Danny
Howell, Director of Maintenance for Dallas Carriers
Corporation in Rockwell, Texas conducted a demonstration
in which semis were installed bumper-to-bumper with
AMSOIL lubricants. AMSOIL 15W-40 Diesel Engine Oil
was used in the engines, and AMSOIL Synthetic 85W-140
Gear Lube was installed in the transmissions, rear
ends and the power train. Periodic oil analysis determined
AMSOIL 15W-40 was serviceable after 200,000 miles
and the engines had minimal wear. AMSOIL 85W-140 was
als still serviceable in the transmissions after 200,000
miles. Howell reported that both the rear ends and
transmissions operated like new with AMSOIL 85W-140.
